Automotive door stabilizer fills the gap in the door striker area using a spacer. This provides quicker steering response by cutting down the delay from when the steering wheel is turned. The built-in sliding mechanism automatically adjusts the gap to zero. Designed to be easy to install, yet maintains a strong visual presence. The factory door striker leaves a slight gap that can make your door rattle or cause unwanted movement under high-performance driving conditions. The door stabilizers reinforce the door when shut to remove any movement in the door striker or the hinge, which will stiffen the body. It is used in the gaps in between door and body, and it reduce the delay of vehicle response during operation. It makes a quick response of the vehicle operation.
The prime factor boosting the production of automotive door stabilizer is the increase in demand for passenger vehicles. With mostly all OEMs wanting to provide comfortable drive to their customers, the demand for door stabilizers have increased. Stabilizers should be checked for stiffness. This causes side to side motion in the car which affects the handling of the vehicle. Installing on non-compatible vehicles can keep doors from closing completely. This can lead to vehicle damage or malfunction while driving caused by doors that are not sufficiently closed.
In the worst case, the door may open while the vehicle is in motion, causing serious accidents.If the stabilizer is not maintained and components replaced at regular maintenance intervals, there is a high risk of component failure as well as catastrophic damage.Automotive Door Stabilizer Market Segmentation By Stabilizer – Male Stabilizer, Female Stabilizer; By Vehicle – Passenger Vehicle, (Compact, Mid-Sized, Premium, Luxury), Light Commercial Vehicle, Heavy Commercial Vehicle